Replacing a Pocket Door With a Swinging Door
Materials and Tools:
tape measure
chop saw
hammer
crowbar
reciprocating saw
screw gun and screws
level
finish nailer
2x4s
drywall and drywall mud
pre-hung door
trim
paint
Steps:
1. Remove molding from around existing pocket door. Cut the existing door out of frame. Carefully cut drywall and pocket door frame to allow a 2x4 "stiffener" on hinge side of the new door. Remove strike-side jamb, cut out steel track above.
2. Cut and install a notched 2x4 on the hinge side of door. Install the new pre-hung door unit.
3. Patch drywall as needed.
4. Replace trim molding
5. Paint drywall patches and any necessary areas to match existing paint