First, use a paint brush to paint the outside of the small wooden pot with one coat of orange paint. Once dry, paint the inside. Next, take the dried pot and add a dab of hot glue to the bottom hole using a low-temp hot glue gun to ensure a snug fit. Then, push the 5’’ dowel rod through the hole about 1’’ from the top. Let dry. Finally, use scissors to trim a few sprigs of lavender to different lengths, around 2’’ in length. Then use a low-temp hot glue gun to affix each sprig to the inside of the pot. Adjust and layer as desired.

First, use a paint brush to paint the outside of the small wooden pot with one coat of orange paint. Once dry, paint the inside. Next, take the dried pot and add a dab of hot glue to the bottom hole using a low-temp hot glue gun to ensure a snug fit. Then, push the 5’’ dowel rod through the hole about 1’’ from the top. Let dry. Finally, use scissors to trim a few sprigs of lavender to different lengths, around 2’’ in length. Then use a low-temp hot glue gun to affix each sprig to the inside of the pot. Adjust and layer as desired.

Place the adhesive flower stencil onto one side of the glass close to the center. Press firmly on the stencil to ensure no gaps. Next, put on protective gloves. Using a paint brush, brush a thick layer of etching cream over the stencil on the glass and let it sit for about 3 minutes. Then, thoroughly rinse the glass and stencil with water. Remove stencil from glass and continue rinsing with water until all etching cream is removed. Repeat above steps on the other side of the glass if desired.

Place the adhesive flower stencil onto one side of the glass close to the center. Press firmly on the stencil to ensure no gaps. Next, put on protective gloves. Using a paint brush, brush a thick layer of etching cream over the stencil on the glass and let it sit for about 3 minutes. Then, thoroughly rinse the glass and stencil with water. Remove stencil from glass and continue rinsing with water until all etching cream is removed. Repeat above steps on the other side of the glass if desired.

This floral etched rocks glass is created using an adhesive stencil, etching cream and a paint brush.

Make a Lavender Collins by adding 1 1/2 ounces of gin, 3/4 ounces fresh lemon juice, 1/2 ounces lavender and blackberry simple syrup and 3 ounces of club soda. Top with ice and garnish with lavender sprigs.

Make a Lavender Collins by adding 1-1/2 ounces of gin, 3/4 ounces fresh lemon juice, 1/2 ounces lavender and blackberry simple syrup and 3 ounces of club soda. Top with ice and garnish with lavender sprigs.

To make Danielle's Mother's Day cocktail gift basket you will need, a basket, crinkle paper, a small potted plant, barware accessories, DIY cocktail mix, club soda, a crafty stirrer, dried lavender, fresh lemons and a lemon squeeze.

To make Danielle's Mother's Day cocktail gift basket you will need, a basket, crinkle paper, a small potted plant, barware accessories, DIY cocktail mix, club soda, a crafty stirrer, dried lavender, fresh lemons and a lemon squeeze.

Make a Lavender Collins by adding 1-1/2 ounces of gin, 3/4 ounces fresh lemon juice, 1/2 ounces lavender and blackberry simple syrup and 3 ounces of club soda. Top with ice and garnish with lavender sprigs.