.-Battle-on-the-Beach-courtesy-of-HGTV.-.jpg.rend.hgtvcom.196.196.suffix/1714761529029.jpeg)
Game on! DIY Cornhole Scoreboard for Tailgating
Win over your friends and family when you show up to your next outdoor event with this clever scoreboard that makes playing cornhole a whole lot more fun!
Cassidy Garcia
Tools + Materials
- (2) 1x12s
- (2) saw horses (optional)
- measuring tape
- drill + bits
- hole saw bits
- sanding block
- (2) 6"-x-9" boards
- 4"-6" board
- 1" wood screws
- 12" hinge
- paint + roller
- painter's tape
- vinyl number stickers
Optional
- wire basket
- bottle opener
- metal trash receptacle
Create Handle
Cassidy Garcia
Cassidy Garcia
Cassidy Garcia
To start, place your 1x12s on two sawhorses. Mark the center at the top of each board about 2-1/4 inches from the edge. Then mark 1/2 inch from the center on both sides. Next mark 1-1/2 inches from the center on both sides. With a 1-1/2-inch hole saw, drill into each mark to create your handle. Repeat on your second board and sand smooth.
Make Cup Holder
Cassidy Garcia
Cassidy Garcia
Cassidy Garcia
Cassidy Garcia
Cassidy Garcia
Next, you'll craft your drink holder. You'll need two 6x9-inch boards and one 4x6-inch board. Mark the center of each 6x9-inch board, and draw a straight line down the center, parallel with the 6-inch side. For one of those boards, you'll also mark the center of each half. This is where you'll drill your cup holders using a 3-inch hole saw.
On the drawn center line on each piece, partially drill three 1-inch screws. Finish drilling both boards on opposite sides of the 4x6-inch board into the 6-inch side. Sand and set aside for later.
Attach Cup Holder
Cassidy Garcia
Cassidy Garcia
Cassidy Garcia
Paint your 1x12s and cup holder in the color of your choice. Then, mark where the cup holder will go and attach to a board with wood screws. At this point, you can also attach a hinge to the top inside of each 1x12 board.
Create Scoreboard
Cassidy Garcia
Cassidy Garcia
Mark the side that does not have the cup holder at 2-1/2 inches in and 8 inches from the top on both sides. Next, mark every 1-1/2 inches down in a straight line until you've made 21 marks on each side. Partially drill each mark.
Add Accessories
Cassidy Garcia
Cassidy Garcia
Cassidy Garcia
On the same side with the cup holder, attach a wire basket to hold your cornhole bags when not in use. We also added a bottle opener and small metal container to catch lids.
Get Sporty
Cassidy Garcia
Cassidy Garcia
Using thin painter's tape (ours was 1 inch), tape off just inside the partially-drilled holes. Using your favorite team's colors, add a sporty stripe. Once dry, add number stickers in order from 1 to 21, and you're ready to play!
Cassidy Garcia
